Shut-off Valve-Egret

Production Description

Laminated aluminum foil tape is a tape with aluminum foil and the base material, the back of the base material is coated with a layer of polypropylene (BOPP) or polyethylene (PE) film and coated with special release agent, and the front face is coated with aggressive acrylic adhesive.

Testimonial from our customer:

“The adhesive on Egret tape has an unusual characteristic. Put the roll of tape and a piece of foil material in a freezer…. pull both out of the freezer after 30 mins. The foil has a slight coating of moisture (condensation) on it…. Adhesive tapes do not usually stick to foil with condensation on it…. Egret tape does.”

Laminated aluminum foil tape Features

* Without release liner.

* Laminated with aluminum +PE or PET or BOPP

* 45-70micron Water-based or Solvent-based acrylic strong adhesion

* 15-50micron soft Aluminum Plain Foil (8011)

* Easy silicon release coating

* Easy cut by hand

Laminated aluminum foil tape Application

It is applicable to encapsulate the AC ducting, refrigerator, freezer and water and heat pipes, construction material etc.

Laminated aluminum foil tape Technical data

Cut roll width: 30mm, 38mm, 40mm, 50mm etc

Cut roll length: 50m, 100m, 200m, 400m etc

Jumbo roll width: 1000mm, 1020mm, 1200mm, etc

Jumbo roll length: 1000x700m, 1020x1000m, 1100x1200m, etc

Tolerance：Thickness: +/- 0.015mm     Width：+/-1.0mm  Length: +/- 0.5m

Storage:  *Indoor storage: -5℃-40℃(humidity:＜80℃)

*No directly stacking on the Floor

*Expiration date: 6 month

(Remark: The thickness of foil and glue can be applicable according to actual demand of users)

Declaration: Supplier shall manufacture all of products accord to above technical parameters, customers has the right to verify and clarify all technical indexes in order to avoid unnecessary issues caused.